Bisco Store Logo

Question Asked by Joseph Ellis on 3/7/2017
 

What is the technique for cementing/bonding an IPS e.max onlay? Both treatment for the restoration and treatment for the tooth

Answer Response by Liang on 3/7/2017
 

IPS e.max lithium disilicate is a silaca-based ceramic, so HF etching followed by silane treatment is the recommended. The bonding/cementing procedure follows:

  1. Try in e.max
  2. Etch the internal surface of e.max with 4-5% HF etchant for 20-25 sec. Rinse with water and dry.
  3. Treat the internal surface with silane primer, 1 coat, 1 min, air dry.
    (Note: only pure silane primer is effective, such as Bisco Porcelain Primer or BisSilane.
    The silane-containing adhesive is not effective.)
  4. If tooth has enamel,  etch the enamel with phosphoric acid etchant, rinse with water. 
  5. Apply dental adhesive on tooth, air dry, light cure 10-20 sec. (note: always treat the restoration first, then treat the tooth structure)
  6. Apply dual-cure resin cement (if it is veneer, apply light-cure veneer cement). Deat the restoration, clean the extra cement

Comments

 
 
 
Ask a Question

Couldn't find an answer to your dental question in our question and answer library? We're always happy to hear from you, so please send us your question.

close