| |
 |
AELITE AESTHETIC ENAMEL
MSDS |
 |
|
| Print MSDS |
| AELITE AESTHETIC ENAMEL
Material Safety Data Sheet |
|
| 1.
Identification of Substance/Preparation and Company/Undertaking |
Product Name:
|
AELITE AESTHETIC ENAMEL
| | Manufacturer: |
Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193
USA
Emergency Telephone: 1-847-534-6000 | | CE
Administrator: | Bisico
France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92
| |
| 2.
Composition/Information on Ingredients |
| Ingredient |
Concentration Range (%) |
CAS Number |
Symbol/Risk
Classification |
OSHA PEL (mg/m3) |
ACGIH (mg/m3) |
LD50
(mg/kg,
rat/oral) |
Ethoxylated bisphenol A dimethacrylate
Bisphenol A diglycidylmethacrylate
Glass frit
Amorphous Silica
| 5-15
5-15
10-30
20-50
| 56744-60-6
1565-94-2
65997-18-4
112945-52-5
| Xi; R36/38-43
Xi; R36/38-43
N/A
N/A
| N/D
N/L
<1
20
| N/D
N/L
<1
10
| N/D
N/D
N/D
N/D
| |
| |
| 3.
Hazards Identification |
Irritates the eye. May cause allergic reaction on skin.,
| |
| 4.
First Aid Measures |
| Inhalation: |
Provide fresh air and rest.
| | Skin Contact: |
Wash with soap and water.
| | Eye Contact: |
Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention.
| | Ingestion: |
Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested.
| |
| 5.
Firefighting Measures |
| Firefighting media: |
Dry chemical powder, foam or carbon dioxide.
| | Fire and explosion risks: |
Upon combustion, irritating gases may form.
| |
| 6.
Accidental Release Measures |
| Personal Precautions: |
Prevent skin/eye contact,
| | Environmental Precautions: |
Avoid ground water contamination,
| | Methods for Cleaning Up: |
Wipe with damp paper towels. Discard properly,
| |
| 7.
Handling and Storage |
Store in ventilated cool dry place (<22C/ 72F); avoid high light intensity >10000 lux; this product is used exclusively for dental purposes by trained personnel.;
| |
| 8.
Exposure Controls/Personal Protection |
| Eye Protection: |
Use protective eyewear;
| | Hand
Protection: |
Use protective gloves;
| | Respiratory
Protection: | Avoid prolonged breathing of vapors of uncured material;
| | Skin
Protection: | Use Any necessary hygiene measures;
| |
| 9.
Physical/Chemical Properties |
| Appearance |
Viscous paste
| Vapor Pressure @ 20C/68F |
N/A
|
| Color |
Tooth colored
| Miscibility |
N/A
|
| Odor |
Slight acrylic odor
| Vapor Density |
N/A
|
| Solubility (H2O, fat) |
Insoluble
| pH |
N/A
|
| Boiling Point/Range |
N/A
| Evaporation Rate |
N/A
|
| Melting Point/Range |
N/A
| Viscosity |
N/A
|
| Flash Point |
>131F (55C)
| Partition Coefficient |
N/A
|
| Conductivity |
N/A
| Autoflammability |
N/A
|
| Explosive Properties |
N/A
| Flammability |
N/A
|
| Oxidizing Properties |
N/A
| Relative Density |
>1
|
|
| |
| 10.
Stability and Reactivity |
Avoid high temperatures; and direct light (>10; 000 lux);
| |
| 11.
Toxicological Information |
| Eye
Contact: | Irritates the eyes;
| | Skin Contact: |
May irritate the skin;
| | Sensitization: |
May cause allergic reaction on contact with the skin;
| | Other: |
N/A,
| |
| 12.
Ecological Information |
| |
| 13.
Disposal Considerations |
Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste.
| |
| 14.
Transport Information |
|
|
| 15.
Regulatory Information |
| Classification: |
Xi Irritant, R36 Irritating to eyes., R38 Irritating to skin., R43 May cause sensitization by skin contact.,
| | Safety: |
Refer to any applicable National laws,
|
|
| 16.
Other Information |
| Revision Date: 11/17/2006
| Replaces MSDS dated: 12/08/2004
| | Revision Number: 2
| Product: AELITE AESTHETIC ENAMEL
|
|
| NOTE:
This information is believed to be correct as of the date of this
MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information
and supplies it on the condition that the person receiving it will make their own determination as
to its suitability for their purposes prior to use. In no event will the manufacturer be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the information contained
herein. |
|
| |
