Material Safety Data Sheet

ALL-BOND 3

1. Identification of Substance/Preparation and Company/Undertaking
Product Name:
ALL-BOND 3
Manufacturer: Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193 USA
Telephone: 1-847-534-6000, during normal business hours
Emergency Telephone Number: CHEMTREC - 24-Hour Hazmat Emergency Communications Center
Domestic: 1-800-424-9300 Outside the U.S.: 1-703-527-3887, collect calls accepted
CE Administrator: Bisico France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92

2. Composition/Information on Ingredients
IngredientConcentration Range (%) CAS Number Symbol/Risk
Classification
OSHA PEL (mg/m3)ACGIH (mg/m3) LD50
(mg/kg,
rat/oral)
  Ethanol (Part A)
NTG-GMA Salt (Part A)
Bis-GMA (Part B)
HEMA (Part B)
BPDM (Part B)
 >90
>1
>40
>20
>5
 64-17-5
211810-95-6
1565-94-2
868-77-9
Proprietary
 F; R11
Xi; R36/37/38 Xi; R36/38/43
Xi; R36/38/43
Xi; R36/38/43
 1900
15
N/D
N/D
N/D
 1880
10
N/D
N/D
N/D
 7060
N/D
N/D
5050
N/D
 
3. Hazards Identification
Part A- F: FLAMMABLE; R11: Highly Flammable. Xi IRRITANT. Part B- Xi IRRITANT. Refer to Section 15- REGULATORY INFORMATION for RISK/SAFETY information. ,

4. First Aid Measures
Inhalation: Provide fresh air and rest.
Skin Contact: Wash with soap and water.
Eye Contact: Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention.
Ingestion: Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested.
5. Firefighting Measures
Firefighting media: Dry chemical powder, foam or carbon dioxide.
Fire and explosion risks: Upon combustion, irritating gases may form.
6. Accidental Release Measures
Personal Precautions: Prevent skin/eye contact,
Environmental Precautions: Avoid ground water contamination,
Methods for Cleaning Up: Wipe with damp paper towel. Discard properly,
7. Handling and Storage
Store in ventilated cool dry place (<22C/ 72F); avoid high light intensity >10000 lux; This product is used exclusively for dental purposes by trained personnel.;

8. Exposure Controls/Personal Protection
Eye Protection:Use protective eyewear;
Hand Protection: Use protective gloves;
Respiratory Protection: Avoid prolonged breathing of vapors of uncured material;
Skin Protection: Use Any necessary hygiene measures;
9. Physical/Chemical Properties
Appearance Clear liquid Vapor Pressure @ 20C/68F 44.6 mmHg Part A
Color Part A: pale yellow, Part B: clear yellow Miscibility Yes
Odor Odor of alcohol Vapor Density N/A
Solubility (H2O, fat) Miscible pH >4
Boiling Point/Range >78C / 172F Part A Evaporation Rate N/A
Melting Point/Range <-144C / -227F Part A Viscosity N/A
Flash Point 14C/57F Part A Partition Coefficient N/A
Conductivity N/A Autoflammability N/A
Explosive Properties N/A Flammability Yes Part A
Oxidizing Properties N/A Relative Density 0.8-1.2
 
10. Stability and Reactivity
Stable. Avoid high temperatures;

11. Toxicological Information
Eye Contact: Irritates the eyes;
Skin Contact: Irritates the skin;
Sensitization: May cause sensitization by skin contact;
Other: N/A,
12. Ecological Information
N/A

13. Disposal Considerations
Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste.

14. Transport Information
No special precautions.

15. Regulatory Information
Classification: PART A F: FLAMMABLE, R11 HIGHLY FLAMMABLE; Xi IRRITANT, R:36/37/38 Irritating to eyes, respiratory system and skin R:43 May cause sensitization by skin contact. PART B Xi IRRITANT, R:36/38 Irritating to eyes and skin R:43 May cause sensitization by skin contact.,
Safety: PART A and B: S2: Keep out of reach of children. S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28: After contact with skin, wash immediately with plenty of water,
16. Other Information
Revision Date: 3/18/2009 Replaces MSDS dated: 11/20/2008
Revision Number: 2 Product: ALL-BOND 3

 

This information is believed to be correct as of the date of this MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information and supplies it on the condition that the person receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will the manufacturer be responsible for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.

NOTE: CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours