| |
 |
ALL-ETCH/ UNI-ETCH/ ETCH-37 (with/without BAC)
MSDS |
 |
|
| Print MSDS |
| ALL-ETCH/ UNI-ETCH/ ETCH-37 (with/without BAC)
Material Safety Data Sheet |
|
| 1.
Identification of Substance/Preparation and Company/Undertaking |
Product Name:
|
ALL-ETCH/ UNI-ETCH/ ETCH-37 (with/without BAC)
| | Manufacturer: |
Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193 USA
| | Telephone: |
1-847-534-6000, during normal business hours |
| Emergency Telephone Number: |
CHEMTREC
- 24-Hour Hazmat Emergency Communications Center
Domestic: 1-800-424-9300 Outside the U.S.: 1-703-527-3887, collect calls accepted |
| CE Administrator: | Bisico
France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92
| |
| 2.
Composition/Information on Ingredients |
| Ingredient |
Concentration Range (%) |
CAS Number |
Symbol/Risk
Classification |
OSHA PEL (mg/m3) |
ACGIH (mg/m3) |
LD50
(mg/kg,
rat/oral) |
Phosphoric Acid
Benzalkonium Chloride (BAC)*
* only for those marked with BAC
| 5-38
0
1-1
| 7664-38-2
8001-54-5
| Uni-Etch and Etch-37
C; R34
All-Etch Xi; R36/38
Xi; R36/38
| 1
N/D
| 1
N/D
| 1,530
240
| |
| |
| 3.
Hazards Identification |
Uni-Etch and Etch-37: Corrosive; causes burns. All-Etch: irritating to eyes and skin.,
| |
| 4.
First Aid Measures |
| Inhalation: |
Provide fresh air and rest. Get medical attention.
| | Skin Contact: |
Wash with soap and water.
| | Eye Contact: |
Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention.
| | Ingestion: |
Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested. Do not induce vomiting.
| |
|
5.
Firefighting Measures |
| Firefighting media: |
Dry chemical powder, foam or carbon dioxide.
| | Fire and explosion
risks: |
Upon combustion, irritating gases may form.
| |
| 6.
Accidental Release Measures |
| Personal Precautions: |
Prevent skin/eye contact,
| | Environmental Precautions:
|
Avoid ground water contamination,
| | Methods for Cleaning
Up: |
Wipe with damp paper towel. Discard properly,
| |
| 7.
Handling and Storage |
Use according to directions for use. Store at room temperature in the original container provided by the manufacturer. Avoid skin contact. At high temperatures toxic fumes of phosphoric acid and phosphorous oxides can be generated. ;
| |
| 8.
Exposure Controls/Personal Protection |
| Eye Protection: |
Use protective eyewear;
| | Hand
Protection: |
Use protective gloves;
| | Respiratory
Protection: | Avoid prolonged breathing of vapors;
| | Skin
Protection: | Use any measures to avoid skin contact;
| |
| 9.
Physical/Chemical Properties |
| Appearance |
Semi-gel
| Vapor Pressure @ 20C/68F |
N/A
|
| Color |
w/BAC, Blue: w/o BAC, Green
| Miscibility |
N/A
|
| Odor |
Odorless
| Vapor Density |
N/A
|
| Solubility (H2O, fat) |
Miscible
| pH |
<1
|
| Boiling Point/Range |
>100C/212F
| Evaporation Rate |
N/A
|
| Melting Point/Range |
<0C/32F
| Viscosity |
N/A
|
| Flash Point |
N/A
| Partition Coefficient |
N/A
|
| Conductivity |
N/A
| Autoflammability |
N/A
|
| Explosive Properties |
N/A
| Flammability |
N/A
|
| Oxidizing Properties |
N/A
| Relative Density |
N/A
|
|
| |
| 10.
Stability and Reactivity |
Stable. Avoid high temperatures. Incompatible with strong caustics; metals; sulfides and sulfites;
| |
| 11.
Toxicological Information |
| Eye
Contact: | Uni-Etch and Etch-37 causes burns. All-Etch irritates the eyes;
| | Skin Contact: |
Uni-Etch and Etch-37 causes burns. All-Etch irritates the skin;
| | Sensitization: |
N/A;
| | Other: |
If swallowed, may cause sore throat and burns of the mouth and throat. Prolonged exposure may cause burns to the respiratory tract, contact with soft tissues may cause burns,
| |
| 12.
Ecological Information |
There is no specific information on the product. Use according to good working practices, avoiding release of the product into environment.
| |
|
13.
Disposal Considerations |
Refer to any Community provisions relating to waste. In their
absence, refer to National or Regional provisions relating to waste.
| |
|
14.
Transport Information |
|
|
|
15.
Regulatory Information |
| Classification: |
Uni-Etch and Etch-37: C; Corrosive R 34; Causes burns. All-Etch: Xi Irritant, R36/38 Irritating to eyes and skin.,
| | Safety: |
S1/2 Keep locked up and out of the reach of childern. S26 In case of contact with eyes rinse immediately with water and seek medical advice. S45 In case of accident or if you feel unwell seek medical advice immediately (show label where possible) Refer to any applicable National laws,
|
|
| 16.
Other Information |
| Revision Date: 11/15/2006
| Replaces MSDS dated: 04/23/2002
| | Revision Number: 7
| Product: ALL-ETCH/ UNI-ETCH/ ETCH-37 (with/without BAC)
|
|
|
This information is believed to be correct as of the date of this
MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information
and supplies it on the condition that the person receiving it will make their own determination as
to its suitability for their purposes prior to use. In no event will the manufacturer be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.
NOTE:
CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the
hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours
|
