| |
 |
BISCOVER Liquid Polish
MSDS |
 |
|
| Print MSDS |
| BISCOVER Liquid Polish
Material Safety Data Sheet |
|
| 1.
Identification of Substance/Preparation and Company/Undertaking |
Product Name:
|
BISCOVER Liquid Polish
| | Manufacturer: |
Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193
USA
Emergency Telephone: 1-847-534-6000 | | CE
Administrator: | Bisico
France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92
| |
| 2.
Composition/Information on Ingredients |
| Ingredient |
Concentration Range (%) |
CAS Number |
Symbol/Risk
Classification |
OSHA PEL (mg/m3) |
ACGIH (mg/m3) |
LD50
(mg/kg,
rat/oral) |
Ethoxylated Bisphenol A Diacrylate
Urethane acrylate ester
Polyethyleneglycol Diacrylate
| 20-50
20-40
20-40
| 64401-02-1
Proprietary
26570-48-9
| Xi, R36/37, R43
Xi, R36/38-43
Xi, R36/38-43
| N/D
N/D
N/D
| N/D
N/D
N/D
| N/D
N/D
N/D
| |
| |
| 3.
Hazards Identification |
Irritates the eye. May irritate the skin. May cause allergic reaction on skin.,
| |
| 4.
First Aid Measures |
| Inhalation: |
Provide fresh air and rest.
| | Skin Contact: |
Wash with soap and water.
| | Eye Contact: |
Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention.
| | Ingestion: |
Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested.
| |
| 5.
Firefighting Measures |
| Firefighting media: |
Dry chemical powder, foam or carbon dioxide.
| | Fire and explosion risks: |
Upon combustion, irritating gases may form.
| |
| 6.
Accidental Release Measures |
| Personal Precautions: |
Prevent skin/eye contact. Provide ventilation,
| | Environmental Precautions: |
Avoid ground water contamination,
| | Methods for Cleaning Up: |
Wipe with damp paper towel. Discard properly,
| |
| 7.
Handling and Storage |
Store in ventilated; dry; cool (less than 25C) place; avoid high light intensity >10000 lux; this product is used exclusively for dental purposes by trained personnel;
| |
| 8.
Exposure Controls/Personal Protection |
| Eye Protection: |
Use protective eyewear;
| | Hand
Protection: |
Use protective gloves;
| | Respiratory
Protection: | Avoid prolonged breathing of vapors of uncured material;
| | Skin
Protection: | Use any necessary hygiene measures;
| |
| 9.
Physical/Chemical Properties |
| Appearance |
Clear viscous liquid
| Vapor Pressure @ 20C/68F |
N/A
|
| Color |
Colorless
| Miscibility |
N/A
|
| Odor |
Slight acrylic odor
| Vapor Density |
N/A
|
| Solubility (H2O, fat) |
Insoluble in water
| pH |
N/A
|
| Boiling Point/Range |
N/A
| Evaporation Rate |
N/A
|
| Melting Point/Range |
N/A
| Viscosity |
N/A
|
| Flash Point |
>131F/55C
| Partition Coefficient |
N/A
|
| Conductivity |
N/A
| Autoflammability |
N/A
|
| Explosive Properties |
N/A
| Flammability |
N/A
|
| Oxidizing Properties |
N/A
| Relative Density |
1.2
|
|
| |
| 10.
Stability and Reactivity |
|
|
| 11.
Toxicological Information |
| Eye
Contact: | Irritates the eyes;
| | Skin Contact: |
May irritate the skin;
| | Sensitization: |
May cause allergic reaction on contact with the skin;
| | Other: |
N/A,
| |
| 12.
Ecological Information |
| |
| 13.
Disposal Considerations |
Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste.
| |
| 14.
Transport Information |
|
|
| 15.
Regulatory Information |
| Classification: |
Xi Irritant. R36 Irritating to eyes. R37 Irritating to the respiratory system. R38 Irritating to skin. R43 May cause sensitization by skin contact.,
| | Safety: |
Refer to any applicable National laws,
|
|
| 16.
Other Information |
| Revision Date: 9/13/2007
| Replaces MSDS dated: 12/03/2004
| | Revision Number: 3
| Product: BISCOVER Liquid Polish
|
|
| NOTE:
This information is believed to be correct as of the date of this
MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information
and supplies it on the condition that the person receiving it will make their own determination as
to its suitability for their purposes prior to use. In no event will the manufacturer be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the information contained
herein. |
|
| |
