BRINGING SCIENCE TO THE ART OF DENTISTRY™
 
 
 
 


Bisco, Inc
.

1100 W. Irving Park Rd.
Schaumburg, IL 60193

sales@bisco.com
Toll Free: 800.247.3368
Ph: 847.534.600
0

Bringing Science to the
Art of Dentistry

© BISCO, INC. 2003

 

 
D.T. LIGHT-POST ILLUSION X-RO MSDS
Print MSDS
D.T. LIGHT-POST ILLUSION X-RO Material Safety Data Sheet



 1. Identification of Substance/Preparation and Company/Undertaking
Product Name:
D.T. LIGHT-POST ILLUSION X-RO
Manufacturer: Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193 USA
Telephone: 1-847-534-6000, during normal business hours
Emergency Telephone Number: CHEMTREC - 24-Hour Hazmat Emergency Communications Center
Domestic: 1-800-424-9300 Outside the U.S.: 1-703-527-3887, collect calls accepted
CE Administrator: Bisico France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92

 2. Composition/Information on Ingredients
Ingredient Concentration Range (%) CAS Number Symbol/Risk
Classification
OSHA PEL (mg/m3) ACGIH (mg/m3) LD50
(mg/kg,
rat/oral)
 Quartz stretched fibres in an epoxy resin, catalyst and colored pigment  100  N/A  N/A  N/E  N/E  N/E
 
 3. Hazards Identification
None known.,

 4. First Aid Measures
Inhalation: Avoid breathing dust while cutting.
Skin Contact: Does not apply to this product.
Eye Contact: Flush with running water for at least 15 minutes while keeping eye lids open; Seek medical attention.
Ingestion: Seek medical attention.
 5. Firefighting Measures
Firefighting media: Water, foam, carbon dioxide, dry chemical or water mist.
Fire and explosion risks: Upon combustion, irritating gases may form.
 6. Accidental Release Measures
Personal Precautions: N/A,
Environmental Precautions: Due to small amount dispose as ordinary waste or contact local regulation authority for advice,
Methods for Cleaning Up: Discard properly,
 7. Handling and Storage
Keep out of reach of children. Keep away from light. This product is used exclusively for dental purposes by trained personnel. Use ordinary hygiene practices; avoid eye and skin contact. Avoid breathing dust by cutting.;

 8. Exposure Controls/Personal Protection
Eye Protection: Use protective eyewear;
Hand Protection: Use protective gloves;
Respiratory Protection:Avoid breathing dust while cutting- wear protective mask;
Skin Protection:Use any necessary hygiene measures;
 9. Physical/Chemical Properties
Appearance Solid state cylinder Vapor Pressure @ 20C/68F N/A
Color Translucent and colored at room temperature. Slightly yellow to colorless at temperature >29 deg C Miscibility N/A
Odor Odorless Vapor Density N/A
Solubility (H2O, fat) Non-soluble in H2O.organic solvents:partly soluble pH N/A
Boiling Point/Range N/A Evaporation Rate N/A
Melting Point/Range N/A Viscosity Not applicable
Flash Point N/A Partition Coefficient N/A
Conductivity N/A Autoflammability N/A
Explosive Properties N/A Flammability N/A
Oxidizing Properties N/A Relative Density 2.86 g/cm3. Specific density (water) not determined
 
10. Stability and Reactivity
Stable;

11. Toxicological Information
Eye Contact:Irritation may occur if unintentional contact;
Skin Contact: May cause moderate skin irritation upon prolonged or repeated contact;
Sensitization: May cause allergic reaction on contact with the skin;
Other: N/A,
12. Ecological Information
N/A

13. Disposal Considerations
Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste.

14. Transport Information
No special precautions.

15. Regulatory Information
Classification: N/A,
Safety: Refer to any applicable National laws,
16. Other Information
Revision Date: 9/11/2009 Replaces MSDS dated: 03/23/2009
Revision Number: 2 Product: D.T. LIGHT-POST ILLUSION X-RO

 

This information is believed to be correct as of the date of this MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information and supplies it on the condition that the person receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will the manufacturer be responsible for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.

NOTE: CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours
 
 
  Join our online communities for exclusive promotions and the latest news: bisco dental bisco dental  
Request Catalog Programs and Sponsorships Contact Bisco Conventions and Lectures Privacy Statement Site Map