| |
 |
LIQUID ETCHANT
MSDS |
 |
|
| Print MSDS |
| LIQUID ETCHANT
Material Safety Data Sheet |
|
| 1.
Identification of Substance/Preparation and Company/Undertaking |
Product Name:
|
LIQUID ETCHANT
| | Manufacturer: |
Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193 USA
| | Telephone: |
1-847-534-6000, during normal business hours |
| Emergency Telephone Number: |
CHEMTREC
- 24-Hour Hazmat Emergency Communications Center
Domestic: 1-800-424-9300 Outside the U.S.: 1-703-527-3887, collect calls accepted |
| CE Administrator: | Bisico
France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92
| |
| 2.
Composition/Information on Ingredients |
| Ingredient |
Concentration Range (%) |
CAS Number |
Symbol/Risk
Classification |
OSHA PEL (mg/m3) |
ACGIH (mg/m3) |
LD50
(mg/kg,
rat/oral) |
| Phosphoric Acid
| 30-40
| 7664-38-2
| C; R34
| 1
| 1
| 1530
| |
| |
| 3.
Hazards Identification |
|
|
| 4.
First Aid Measures |
| Inhalation: |
Provide fresh air and rest.
| | Skin Contact: |
Wash immediately with soap and water.
| | Eye Contact: |
Flush immediately with running water for at least 15 minutes while keeping eye lids open; seek medical attention.
| | Ingestion: |
Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested.
| |
|
5.
Firefighting Measures |
| Firefighting media: |
Dry chemical powder, foam or carbon dioxide.
| | Fire and explosion
risks: |
Upon combustion, irritating gases may form.
| |
| 6.
Accidental Release Measures |
| Personal Precautions: |
Prevent skin/eye contact,
| | Environmental Precautions:
|
Avoid ground water contamination,
| | Methods for Cleaning
Up: |
Wipe with damp paper towels, Discard properly,
| |
| 7.
Handling and Storage |
Use according to directions for use. Store at room temperature (22C/72F) in the original container provided by the manufacturer. Avoid skin contact. At high temperatures toxic fumes of phosphoric acid and phosphorous oxides can be generated. ;
| |
| 8.
Exposure Controls/Personal Protection |
| Eye Protection: |
Use protective eyewear;
| | Hand
Protection: |
Use protective gloves;
| | Respiratory
Protection: | Avoid prolonged breathing of vapors of uncured material;
| | Skin
Protection: | Use any necessary hygiene measures to avoid skin contact;
| |
| 9.
Physical/Chemical Properties |
| Appearance |
Green liquid
| Vapor Pressure @ 20C/68F |
<.02mm
|
| Color |
Green
| Miscibility |
N/A
|
| Odor |
N/A
| Vapor Density |
N/A
|
| Solubility (H2O, fat) |
Miscible in water
| pH |
<1
|
| Boiling Point/Range |
>100C/212F
| Evaporation Rate |
N/A
|
| Melting Point/Range |
N/A
| Viscosity |
N/A
|
| Flash Point |
N/A
| Partition Coefficient |
N/A
|
| Conductivity |
N/A
| Autoflammability |
N/A
|
| Explosive Properties |
N/A
| Flammability |
Non-flammable
|
| Oxidizing Properties |
N/A
| Relative Density |
>1
|
|
| |
| 10.
Stability and Reactivity |
Stable. Avoid high temperatures. Incompatible with strong caustics; metals; sulfides and sulfites;
| |
| 11.
Toxicological Information |
| Eye
Contact: | Irritates the eyes; may be corrosive;
| | Skin Contact: |
May irritate the skin; may burn the skin;
| | Sensitization: |
None known;
| | Other: |
N/A,
| |
| 12.
Ecological Information |
Stable. Avoid high temperatures. Incompatible with strong caustics, metals, sulfides and sulfites
| |
|
13.
Disposal Considerations |
Refer to any Community provisions relating to waste. In their
absence, refer to National or Regional provisions relating to waste.
| |
|
14.
Transport Information |
|
|
|
15.
Regulatory Information |
| Classification: |
C Corrosive, R34 Causes burns.,
| | Safety: |
Refer to any applicable National laws,
|
|
| 16.
Other Information |
| Revision Date: 2/24/2005
| Replaces MSDS dated: 09/11/2001
| | Revision Number: 1
| Product: LIQUID ETCHANT
|
|
|
This information is believed to be correct as of the date of this
MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information
and supplies it on the condition that the person receiving it will make their own determination as
to its suitability for their purposes prior to use. In no event will the manufacturer be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.
NOTE:
CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the
hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours
|
