| |
 |
PORCELAIN ETCHANT (9.5%)
MSDS |
 |
|
| Print MSDS |
| PORCELAIN ETCHANT (9.5%)
Material Safety Data Sheet |
|
| 1.
Identification of Substance/Preparation and Company/Undertaking |
Product Name:
|
PORCELAIN ETCHANT (9.5%)
| | Manufacturer: |
Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193 USA
| | Telephone: |
1-847-534-6000, during normal business hours |
| Emergency Telephone Number: |
CHEMTREC
- 24-Hour Hazmat Emergency Communications Center
Domestic: 1-800-424-9300 Outside the U.S.: 1-703-527-3887, collect calls accepted |
| CE Administrator: | Bisico
France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92
| |
| 2.
Composition/Information on Ingredients |
| Ingredient |
Concentration Range (%) |
CAS Number |
Symbol/Risk
Classification |
OSHA PEL (mg/m3) |
ACGIH (mg/m3) |
LD50
(mg/kg,
rat/oral) |
|
Hydrofluoric acid
Poly(2-acrylamido-2-methyl-1-propanesulfonic acid))
|
8-10
40-75
|
7664-39-3
27119-07-9
| T+; C;
R26/27/28/35
Xi/36/37/38
|
3 ppm
N/D
|
3 ppm
N/D
|
N/D
4500
| |
| |
| 3.
Hazards Identification |
|
|
| 4.
First Aid Measures |
| Inhalation: |
Get medical help immediately.
| | Skin Contact: |
Wash affected area mmediately with soap and water.
| | Eye Contact: |
Immediately irigate wes for at least 15 minutes while keeping eye lids open; Seek medical attention immediately.
| | Ingestion: |
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Seek medical attention.
| |
|
5.
Firefighting Measures |
| Firefighting media: |
Dry chemical powder, foam or carbon dioxide.
| | Fire and explosion
risks: |
Upon heating, irritating or toxic gases may form.
| |
| 6.
Accidental Release Measures |
| Personal Precautions: |
Prevent skin/eye contact. Provide ventilation. Must wear personal protective apparel.,
| | Environmental Precautions:
|
Avoid ground water contamination,
| | Methods for Cleaning
Up: |
Wipe with damp paper towels, Discard properly,
| |
| 7.
Handling and Storage |
Store in ventilated cool dry place (<25C; 77F); this product is used exclusively for dental purposes by trained personnel.;
| |
| 8.
Exposure Controls/Personal Protection |
| Eye Protection: |
Use protective eyewear;
| | Hand
Protection: |
Use protective gloves;
| | Respiratory
Protection: | Avoid breathing of vapors. ;
| | Skin
Protection: | Use protective apparel and necessary hygiene measures;
| |
| 9.
Physical/Chemical Properties |
| Appearance |
Gel
| Vapor Pressure @ 20C/68F |
N/A
|
| Color |
Yellow
| Miscibility |
N/A
|
| Odor |
Odorless
| Vapor Density |
N/A
|
| Solubility (H2O, fat) |
Miscible
| pH |
2
|
| Boiling Point/Range |
>100 C (212F)
| Evaporation Rate |
N/A
|
| Melting Point/Range |
<0C (32F)
| Viscosity |
N/A
|
| Flash Point |
N/A
| Partition Coefficient |
N/A
|
| Conductivity |
N/A
| Autoflammability |
N/A
|
| Explosive Properties |
N/A
| Flammability |
Non Flammable
|
| Oxidizing Properties |
N/A
| Relative Density |
>1
|
|
| |
| 10.
Stability and Reactivity |
Avoid high temperatures; Do not store in metal or glass containers;
| |
| 11.
Toxicological Information |
| Eye
Contact: | Severe burns to eyes.;
| | Skin Contact: |
Very toxic in contact with skin. Causes severe burns. Will cause almost no immediate pain on contact but may cause delayed serious injury.;
| | Sensitization: |
None known;
| | Other: |
Very toxic by inhalation and if swallowed.,
| |
| 12.
Ecological Information |
| |
|
13.
Disposal Considerations |
Refer to any Community provisions relating to waste. In their
absence, refer to National or Regional provisions relating to waste.
| |
|
14.
Transport Information |
|
|
|
15.
Regulatory Information |
| Classification: |
T+ Very toxic; C Corrosive; R26/27/28 Very toxic by inhalation, in contact with skin and if swallowed, R35 Causes severe burns,
| | Safety: |
Refer to any applicable National laws,
|
|
| 16.
Other Information |
| Revision Date: 3/10/2008
| Replaces MSDS dated: 9/27/2005
| | Revision Number: 1
| Product: PORCELAIN ETCHANT (9.5%)
|
|
|
This information is believed to be correct as of the date of this
MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information
and supplies it on the condition that the person receiving it will make their own determination as
to its suitability for their purposes prior to use. In no event will the manufacturer be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.
NOTE:
CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the
hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours
|
