| |
 |
TESCERA RUBBER SEPARATOR
MSDS |
 |
|
| Print MSDS |
| TESCERA RUBBER SEPARATOR
Material Safety Data Sheet |
|
| 1.
Identification of Substance/Preparation and Company/Undertaking |
Product Name:
|
TESCERA RUBBER SEPARATOR
| | Manufacturer: |
Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193
USA
Emergency Telephone: 1-847-534-6000 | | CE
Administrator: | Bisico
France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92
| |
| 2.
Composition/Information on Ingredients |
| Ingredient |
Concentration Range (%) |
CAS Number |
Symbol/Risk
Classification |
OSHA PEL (mg/m3) |
ACGIH (mg/m3) |
LD50
(mg/kg,
rat/oral) |
| Ammonium Hydroxide
Latex Solids (non hazardous)
| <0,4
20-60
| 1336-21-6
9006-04-6
| Xi: R36/37/38-43
N/A
| 50 ppm
N/A
| 25 ppm
N/A
| 350
N/A
| |
| |
| 3.
Hazards Identification |
Irritates the eyes; respitatory system; and skin, May cause allergic reaction on skin. Extra caution may be needed for those allergic to latex.,
| |
| 4.
First Aid Measures |
| Inhalation: |
Provide fresh air and rest.
| | Skin Contact: |
Wash with soap and water.
| | Eye Contact: |
Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention.
| | Ingestion: |
Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested.
| |
| 5.
Firefighting Measures |
| Firefighting media: |
Dry chemical powder, foam or carbon dioxide.
| | Fire and explosion risks: |
Upon combustion, irritating gases may form.
| |
| 6.
Accidental Release Measures |
| Personal Precautions: |
Prevent skin/eye contact, Provide ventilation,
| | Environmental Precautions: |
Avoid ground water contamination,
| | Methods for Cleaning Up: |
Wipe with damp paper towels, Discard properly,
| |
| 7.
Handling and Storage |
this product is used exclusively for dental purposes by trained personnel; cleaning up refer to Section 6. Extra caution may be needed for those allergic to latex.;
| |
| 8.
Exposure Controls/Personal Protection |
| Eye Protection: |
Use protective eyewear;
| | Hand
Protection: |
Use protective gloves;
| | Respiratory
Protection: | Avoid prolonged breathing of vapors; use in well ventilated area;
| | Skin
Protection: | Use any necessary hygiene measures;
| |
| 9.
Physical/Chemical Properties |
| Appearance |
Pink liquid
| Vapor Pressure @ 20C/68F |
28
|
| Color |
Pink
| Miscibility |
water
|
| Odor |
Light ammonia
| Vapor Density |
same as water
|
| Solubility (H2O, fat) |
miscible
| pH |
10 - 11.2
|
| Boiling Point/Range |
100C/212F
| Evaporation Rate |
same as water
|
| Melting Point/Range |
NA
| Viscosity |
NA
|
| Flash Point |
not flammable
| Partition Coefficient |
NA
|
| Conductivity |
NA
| Autoflammability |
NA
|
| Explosive Properties |
NA
| Flammability |
not flammable
|
| Oxidizing Properties |
NA
| Relative Density |
0.98
|
|
| |
| 10.
Stability and Reactivity |
Avoid high temperatures; Keep from freezing;
| |
| 11.
Toxicological Information |
| Eye
Contact: | Irritates the eyes;
| | Skin Contact: |
Irritates the skin;
| | Sensitization: |
May cause allergic reaction on contact with the skin;
| | Other: |
Irritates the respiratory system,
| |
| 12.
Ecological Information |
| |
| 13.
Disposal Considerations |
Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste.
| |
| 14.
Transport Information |
|
|
| 15.
Regulatory Information |
| Classification: |
Xi Irritant, R36 Irritating to eyes., R38 Irritating to respiratory system R38 Irritating to skin., R43 May cause sensitization by skin contact.,
| | Safety: |
Refer to any applicable National laws,
|
|
| 16.
Other Information |
| Revision Date: 11/21/2007
| Replaces MSDS dated: 08/24/2004
| | Revision Number: 2
| Product: TESCERA RUBBER SEPARATOR
|
|
| NOTE:
This information is believed to be correct as of the date of this
MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information
and supplies it on the condition that the person receiving it will make their own determination as
to its suitability for their purposes prior to use. In no event will the manufacturer be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the information contained
herein. |
|
| |
