Material Safety Data Sheet

TWINZ VPS TRAY ADHESIVE

1. Identification of Substance/Preparation and Company/Undertaking
Product Name:
TWINZ VPS TRAY ADHESIVE
Manufacturer: Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193 USA
Telephone: 1-847-534-6000, during normal business hours
Emergency Telephone Number: CHEMTREC - 24-Hour Hazmat Emergency Communications Center
Domestic: 1-800-424-9300 Outside the U.S.: 1-703-527-3887, collect calls accepted
CE Administrator: Bisico France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92

2. Composition/Information on Ingredients
IngredientConcentration Range (%) CAS Number Symbol/Risk
Classification
OSHA PEL (mg/m3)ACGIH (mg/m3) LD50
(mg/kg,
rat/oral)
 Methyl Ethyl Ketone

Dichloromethane
 0-100

0-100
 78-93-3

75-09-02
 F, Xi, R11/36/66/67
Xn,R40
 N/A

N/A
 N/A

N/A
 N/A

N/A
 
3. Hazards Identification
Flammable. Irritates the eyes and skin. Vapors may cause drowsiness and dizziness. Repeated exposure may cause skin dryness or cracking. ,

4. First Aid Measures
Inhalation: Provide fresh air and rest.
Skin Contact: Wash with soap and water. Remove contaminated clothing.
Eye Contact: Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention.
Ingestion: Drink two glasses of water. Seek medical attention if a substantial amount has been ingested.
5. Firefighting Measures
Firefighting media: Dry chemical powder, foam or carbon dioxide.
Fire and explosion risks: N/A
6. Accidental Release Measures
Personal Precautions: Provide respiratory protection. Provide ventilation,
Environmental Precautions: Avoid surface water contamination,
Methods for Cleaning Up: Wipe with damp paper towels. Discard properly,
7. Handling and Storage
Close tightly and store in ventilated cool dry place (<22C/ 72F). Protect from light.;

8. Exposure Controls/Personal Protection
Eye Protection:Use protective eyewear;
Hand Protection: Use protective gloves;
Respiratory Protection: Do not inhale vapors.;
Skin Protection: Use any necessary hygiene measures;
9. Physical/Chemical Properties
Appearance Liquid Vapor Pressure @ 20C/68F 100 mbar
Color Green Miscibility miscible in acetone
Odor similar to acetone Vapor Density N/A
Solubility (H2O, fat) insoluble in H2O pH neutral
Boiling Point/Range 40C/104F Evaporation Rate N/A
Melting Point/Range -86C/-123F Viscosity N/A
Flash Point -1C/30F Partition Coefficient N/A
Conductivity N/A Autoflammability N/A
Explosive Properties N/A Flammability Flammable
Oxidizing Properties N/A Relative Density N/A
 
10. Stability and Reactivity
Avoid high temperatures. Avoid contact with oxidation agents. Avoid contact with alkali metals;

11. Toxicological Information
Eye Contact: Irritates the eyes;
Skin Contact: Irritates the skin;
Sensitization: N/A;
Other: N/A,
12. Ecological Information
N/A

13. Disposal Considerations
Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste.

14. Transport Information
No special precautions.

15. Regulatory Information
Classification: F Flammable. R11 Highly flammable. R36 Irritating to eyes. R38 Irritating to skin. R40 Possible risk of irreversable effects. R66 repeated exposure may cause skin dryness or cracking. R67 Vapors may cause drowsiness and dizziness.,
Safety: Refer to any applicable National laws,
16. Other Information
Revision Date: 2/6/2003 Replaces MSDS dated: 08/26/02
Revision Number: 1 Product: TWINZ VPS TRAY ADHESIVE

 

This information is believed to be correct as of the date of this MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information and supplies it on the condition that the person receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will the manufacturer be responsible for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.

NOTE: CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours