| |
 |
Transluma
MSDS |
 |
|
|
|
| 1.
Identification of Substance/Preparation and Company/Undertaking |
Product Name:
|
Transluma
| | Manufacturer: |
Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193 USA
| | Telephone: |
1-847-534-6000, during normal business hours |
| Emergency Telephone Number: |
CHEMTREC
- 24-Hour Hazmat Emergency Communications Center
Domestic: 1-800-424-9300 Outside the U.S.: 1-703-527-3887, collect calls accepted |
| CE Administrator: | Bisico
France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92
| |
| 2.
Composition/Information on Ingredients |
| Ingredient |
Concentration Range (%) |
CAS Number |
Symbol/Risk
Classification |
OSHA PEL (mg/m3) |
ACGIH (mg/m3) |
LD50
(mg/kg,
rat/oral) |
| Glass Fibers
Epoxy Resin
Inorganic Filler
| <75%
<30%
<10%
| 65997-17-3
036425-15-7
N/A
| N/A
N/A
N/A
| N/E
N/E
N/E
| N/E
N/E
N/E
| N/E
N/E
N/E
| |
| |
| 3.
Hazards Identification |
Does not contain any hazardous components. Avoid inhalation of grinding dust.,
| |
| 4.
First Aid Measures |
| Inhalation: |
Remove to fresh air.
| | Skin Contact: |
N/A
| | Eye Contact: |
Mechanical effects only; With dust, Flush eyes with copius amounts of water.
| | Ingestion: |
Seek medical attention if a substantial amount has been ingested.
| |
|
5.
Firefighting Measures |
| Firefighting media: |
Dry chemical powder, foam or carbon dioxide.
| | Fire and explosion
risks: |
Upon combustion, irritating gases may form.
| |
| 6.
Accidental Release Measures |
| Personal Precautions: |
N/A,
| | Environmental Precautions:
|
N/A,
| | Methods for Cleaning
Up: |
Discard properly,
| |
| 7.
Handling and Storage |
This product is used exclusively for dental purposes by trained personnel. Keep out of reach of children.;
| |
| 8.
Exposure Controls/Personal Protection |
| Eye Protection: |
Safety glasses and surgical face mask;
| | Hand
Protection: |
Use protective gloves;
| | Respiratory
Protection: | Avoid inhalation of dust during grinding;
| | Skin
Protection: | Use any necessary hygiene measures;
| |
| 9.
Physical/Chemical Properties |
| Appearance |
Small diameter (<3mm) cylinder
| Vapor Pressure @ 20C/68F |
N/A
|
| Color |
Translucent
| Miscibility |
N/A
|
| Odor |
N/A
| Vapor Density |
N/A
|
| Solubility (H2O, fat) |
N/A
| pH |
N/A
|
| Boiling Point/Range |
N/A
| Evaporation Rate |
N/A
|
| Melting Point/Range |
N/A
| Viscosity |
N/A
|
| Flash Point |
>131F (55C)
| Partition Coefficient |
N/A
|
| Conductivity |
N/A
| Autoflammability |
N/A
|
| Explosive Properties |
N/A
| Flammability |
non flammable
|
| Oxidizing Properties |
N/A
| Relative Density |
N/A
|
|
| |
| 10.
Stability and Reactivity |
|
|
| 11.
Toxicological Information |
| Eye
Contact: | N/A;
| | Skin Contact: |
N/A;
| | Sensitization: |
N/A;
| | Other: |
N/A,
| |
| 12.
Ecological Information |
| |
|
13.
Disposal Considerations |
Refer to any Community provisions relating to waste. In their
absence, refer to National or Regional provisions relating to waste.
| |
|
14.
Transport Information |
|
|
|
15.
Regulatory Information |
| Classification: |
N/A,
| | Safety: |
Refer to any applicable National laws,
|
|
| 16.
Other Information |
| Revision Date: 7/18/2008
| Replaces MSDS dated: 10/25/2007
| | Revision Number: 1
| Product: Transluma
|
|
|
This information is believed to be correct as of the date of this
MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information
and supplies it on the condition that the person receiving it will make their own determination as
to its suitability for their purposes prior to use. In no event will the manufacturer be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.
NOTE:
CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the
hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours
|
