Material Safety Data Sheet
UNI-ETCH with BAC
|
| 1.
Identification of Substance/Preparation and Company/Undertaking |
Product Name:
|
UNI-ETCH with BAC
| | Manufacturer: |
Bisco, Inc. 1100 W Irving Park Road, Schaumburg, IL 60193 USA
| | Telephone: |
1-847-534-6000, during normal business hours |
| Emergency Telephone Number: |
CHEMTREC
- 24-Hour Hazmat Emergency Communications Center
Domestic: 1-800-424-9300 Outside the U.S.: 1-703-527-3887, collect calls accepted |
| CE Administrator: | Bisico
France, B.P. 60, 'L-Opera'-13680 Lancon de Provence
Emergency Telephone: (33)490.42.92.92
|
|
| 2.
Composition/Information on Ingredients |
| Ingredient | Concentration Range (%) |
CAS Number | Symbol/Risk
Classification |
OSHA PEL (mg/m3) | ACGIH (mg/m3) |
LD50
(mg/kg,
rat/oral) |
Phosphoric acid
Benzalkonium chloride
| 32
<1
| 7664-38-2
8001-54-5
| C, R34
Xi; R36/38
| N/D
N/D
| N/D
N/D
| N/D
240
|
|
| |
| 3. Hazards Identification |
| |
| 4.
First Aid Measures |
| Inhalation: |
Provide fresh air and rest.
| | Skin Contact: |
Wash with soap and water.
| | Eye Contact: |
Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention.
| | Ingestion: |
Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested. Do not induce vomiting.
|
|
| 5.
Firefighting Measures |
| Firefighting media: |
Dry chemical powder, foam or carbon dioxide.
| | Fire and explosion risks: |
Upon combustion, irritating gases may form.
|
|
| 6. Accidental Release Measures |
| Personal Precautions: |
Prevent skin/eye contact,
| | Environmental Precautions: |
Avoid ground water contamination,
| | Methods for Cleaning Up: |
Wipe with damp paper towel. Discard properly,
|
|
| 7. Handling and Storage |
Use according to directions for use. Store at room temperature in the original container provided by the manufacturer. Avoid unnecessary exposure to the product. At high temperatures toxic fumes of phosphoric acid and phosphorous oxides can be generated;
|
|
| 8.
Exposure Controls/Personal Protection |
| Eye
Protection: | Use protective eyewear;
| | Hand Protection: |
Use protective gloves;
| | Respiratory Protection: |
Avoid prolonged breathing of vapors;
| | Skin Protection: |
Use Any necessary hygiene measures;
|
|
| 9. Physical/Chemical Properties |
| Appearance |
Semi-gel
| Vapor Pressure @ 20C/68F |
<0.02mm
| | Color |
Blue
| Miscibility |
N/A
| | Odor |
Odorless
| Vapor Density |
N/A
| | Solubility (H2O, fat) |
Soluble
| pH |
<1
| | Boiling Point/Range |
>100C/212F
| Evaporation Rate |
N/A
| | Melting Point/Range |
<0C/32F
| Viscosity |
N/A
|
| Flash Point |
N/A
| Partition Coefficient |
N/A
|
| Conductivity |
N/A
| Autoflammability |
N/A
|
| Explosive Properties |
N/A
| Flammability |
Non Flammable
|
| Oxidizing Properties |
N/A
| Relative Density |
>1
| |
| |
| 10. Stability and Reactivity |
Stable. Avoid high temperatures. Incompatibility to strong caustics; metals; sulfides and sulfites;
| |
| 11.
Toxicological Information |
| Eye Contact: |
Causes burns;
| | Skin Contact: |
Causes burns;
| | Sensitization: |
N/A;
| | Other: |
If swallowed, may cause sore throat and burns of the mouth and throat. Prolonged exposure may cause burns to the respiratory tract , contact with soft tissues may cause burns,
| |
| 12. Ecological Information |
There is no specific information on the product. Use according to good working practices, avoiding release of the product into environment.
|
|
| 13. Disposal Considerations |
Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste.
|
|
| 14. Transport Information |
| |
| 15. Regulatory Information |
| Classification: |
C Corrosive, R34 Causes burns.,
| | Safety: |
Refer to any applicable National laws,
| |
| 16. Other Information |
| Revision Date: 7/25/2006
| Replaces MSDS dated: 12/03/2004
| | Revision Number: 7
| Product: UNI-ETCH with BAC
|
|
This information is believed to be correct as of the date of this
MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information
and supplies it on the condition that the person receiving it will make their own determination as
to its suitability for their purposes prior to use. In no event will the manufacturer be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.
NOTE:
CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the
hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours
| |
| |