|
ÆLITE
Liner is a dual-cured, flowable liner that is extremely
radiopaque for visibility on radiographs (X-Ray films).
Although it is indicated for all restorations that require
a liner, it is ideal for use prior to the placement
of radiolucent restorations. Its radiopacity outlines
the restoration and reduces the risk of misdiagnosing
caries. It is intended for use with adhesives, such
as the ALL-BOND®* and ONE-STEP®*
Adhesive systems.
| Refer
to manufacturer's instructions. Not all one-bottle
adhesives bond to dual-cured or self-cured composites.
Unlike others, ONE-STEP and ONE-STEP PLUS bond to
dual-cured and self-cured materials. |
|
1. Etch tooth with
UNI-ETCH®*
and apply adhesive, ONE-STEP, according to the manufacturer's
instructions.
2. Place a small increment of ÆLITE Liner
into the cavity preparation to line the pulpal floor,
axial walls and gingival floor. Based on preference, ÆLITE
Liner can also be applied using a hand instrument.
NOTE: Due to the opaque nature of this material, remove
excess material from margins when aesthetics are a concern.
3. Light-cure for
40 seconds (halogen @ 500mW/cm²). If additional
material is required, repeat steps 2 & 3.
4. Continue restorative procedure by placing restorative
material as required.
HOW SUPPLIED:
1 Dual-Syringe
Package
B-27012P
1 Dual-Syringe (Base/Catalyst, 8g mixed), Accessories,
Instructions/MSDS
STORAGE:
Store at room temperature (22°C/72°F). See individual
component labels for specific expiration dates.
PRECAUTIONS:
Unpolymerized resins may cause skin sensitization in
susceptible persons. In case of contact, wash skin with
soap and water.
WARRANTY:
Bisco, Inc. recognizes its responsibility to replace
products if proven to be defective. Bisco, Inc. does
not accept liability for any damages or loss, either
direct or consequential, stemming from the use of or
inability to use the products as described. Before using,
it is the responsibility of the user to determine the
suitability of the product for its intended use. The
user assumes all risk and liability in connection therewith.
CAUTION:
U.S. Federal law restricts this device to sale by or
on the order of a dental professional.
* ONE-STEP, ALL-BOND
and UNI-ETCH are registered trademarks of Bisco, Inc.
ÆLITE is a trademark of Bisco, Inc.
Bisco, Inc.
1100 W. Irving Park Rd.
Schaumburg, IL 60193
U.S.A.
847-534-6000
1-(800)-BIS-DENT
www.bisco.com
CE ADMINISTRATOR
Bisico France -
Mr. Fred Picavet
L'Opera- BP. 60
13680 Lancon De Provence
France
Phone: 33-490-42-9292
Fax: 33-490-42-9261
IN-140
Rev. 9/04
|
