ÆLITE Liner is a dual-cured, flowable liner that is extremely radiopaque for visibility on radiographs (X-Ray films). Although it is indicated for all restorations that require a liner, it is ideal for use prior to the placement of radiolucent restorations. Its radiopacity outlines the restoration and reduces the risk of misdiagnosing caries. It is intended for use with adhesives, such as the ALL-BOND^®* and ONE-STEP^®* Adhesive systems.

Refer to manufacturer's instructions. Not all one-bottle adhesives bond to dual-cured or self-cured composites. Unlike others, ONE-STEP and ONE-STEP PLUS bond to dual-cured and self-cured materials.

1. Etch tooth with UNI-ETCH^®* and apply adhesive, ONE-STEP, according to the manufacturer's instructions.

2. Place a small increment of ÆLITE Liner into the cavity preparation to line the pulpal floor, axial walls and gingival floor. Based on preference, ÆLITE Liner can also be applied using a hand instrument.

NOTE: Due to the opaque nature of this material, remove excess material from margins when aesthetics are a concern.

3. Light-cure for 40 seconds (halogen @ 500mW/cm²). If additional material is required, repeat steps 2 & 3.

4. Continue restorative procedure by placing restorative material as required.

HOW SUPPLIED:

1 Dual-Syringe Package
B-27012P
1 Dual-Syringe (Base/Catalyst, 8g mixed), Accessories, Instructions/MSDS

STORAGE: Store at room temperature (22°C/72°F). See individual component labels for specific expiration dates.

PRECAUTIONS: Unpolymerized resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water.

WARRANTY: Bisco, Inc. recognizes its responsibility to replace products if proven to be defective. Bisco, Inc. does not accept liability for any damages or loss, either direct or consequential, stemming from the use of or inability to use the products as described. Before using, it is the responsibility of the user to determine the suitability of the product for its intended use. The user assumes all risk and liability in connection therewith.

CAUTION: U.S. Federal law restricts this device to sale by or on the order of a dental professional.

* ONE-STEP, ALL-BOND and UNI-ETCH are registered trademarks of Bisco, Inc.
ÆLITE is a trademark of Bisco, Inc.

Bisco, Inc.
1100 W. Irving Park Rd.
Schaumburg, IL 60193
U.S.A.
847-534-6000
1-(800)-BIS-DENT
www.bisco.com

CE ADMINISTRATOR
Bisico France -
Mr. Fred Picavet
L'Opera- BP. 60
13680 Lancon De Provence
France
Phone: 33-490-42-9292
Fax: 33-490-42-9261

IN-140
Rev. 9/04