|
Isolate the area
to be etched with a rubber dam. Bisco BARRIER GEL
should be placed where etching is not desired. Care
must be taken to avoid having the etchant contact glazed
porcelain surfaces since these surfaces will lose their
gloss.
HOW SUPPLIED:
G-96020P
2 Syringes BARRIER GEL (5g ea.), Accessories, Instructions/MSDS
STORAGE:
Store at room temperature (22°C/72°F). Refer
to individual component labels for specific expiration
dates.
CAUTIONS:
PORCELAIN ETCHANT is a severe eye irritant and tissue
irritant. If accidentally splashed into the eye, flush
with a copious amount of water and seek
medical attention immediately.
If PORCELAIN ETCHANT
comes in contact with other tissues, rinse spills immediately
with a copious amount of water for several minutes.
Injury may result if etchant is allowed to remain on
the skin or mucosa for extended periods of time.
WARRANTY:
Bisco, Inc. recognizes its responsibility to replace
products if proven to be defective. Bisco, Inc. does
not accept liability for any damages or loss, either
direct or consequential, stemming from the use of or
inability to use the products as described. Before using,
it is the responsibility of the user to determine the
suitability of the product for its intended use. The
user assumes all risk and liability in connection therewith.
CAUTION:
U.S. Federal law restricts this device to sale by or
on the order of a dental professional.
* BARRIER GEL is
manufactured by Bisco, Inc.
Bisco, Inc.
1100 W. Irving Park Road
Schaumburg, IL 60193
U.S.A.
847-534-6000
1-800-BIS-DENT
CE ADMINISTRATOR
Bisico France -
Mr. Fred Picavet
L'Opera- BP. 60
13680 Lancon De Provence
France
Phone: 33-490-42-9292
Fax: 33-490-42-9261
IN-153
Rev. 9/05
|
