Isolate the area to be etched with a rubber dam. Bisco BARRIER GEL should be placed where etching is not desired. Care must be taken to avoid having the etchant contact glazed porcelain surfaces since these surfaces will lose their gloss.

HOW SUPPLIED:

G-96020P
2 Syringes BARRIER GEL (5g ea.), Accessories, Instructions/MSDS

STORAGE: Store at room temperature (22°C/72°F). Refer to individual component labels for specific expiration dates.

CAUTIONS: PORCELAIN ETCHANT is a severe eye irritant and tissue irritant. If accidentally splashed into the eye, flush with a copious amount of water and seek medical attention immediately.

If PORCELAIN ETCHANT comes in contact with other tissues, rinse spills immediately with a copious amount of water for several minutes. Injury may result if etchant is allowed to remain on the skin or mucosa for extended periods of time.

WARRANTY: Bisco, Inc. recognizes its responsibility to replace products if proven to be defective. Bisco, Inc. does not accept liability for any damages or loss, either direct or consequential, stemming from the use of or inability to use the products as described. Before using, it is the responsibility of the user to determine the suitability of the product for its intended use. The user assumes all risk and liability in connection therewith.

CAUTION: U.S. Federal law restricts this device to sale by or on the order of a dental professional.

* BARRIER GEL is manufactured by Bisco, Inc.

Bisco, Inc.
1100 W. Irving Park Road
Schaumburg, IL 60193
U.S.A.
847-534-6000
1-800-BIS-DENT

CE ADMINISTRATOR
Bisico France -
Mr. Fred Picavet
L'Opera- BP. 60
13680 Lancon De Provence
France
Phone: 33-490-42-9292
Fax: 33-490-42-9261

IN-153
Rev. 9/05