1. Clean the entire surface with a slurry of pumice and a disinfectant such as CAVITY CLEANSER™* or water.

2. Etch remaining coronal tooth structure using an etchant, such as ETCH-37™* or UNI-ETCH^®*, according to manufacturer's instructions.

3. Apply an adhesive, such as ALL-BOND 2 or ONE-STEP, according to the manufacturer's instructions.

4. Dispense an equal amount of CORE-FLO Base and Catalyst pastes onto a mixing pad. Mix to a uniform paste (10-15 seconds). Do not over mix to avoid incorporation of air. Avoid the use of metal instruments for mixing which may discolor the material.

5. Fill a Low Viscosity™* syringe tip with the composite and inject into the preparation and around the post, if present. Continue to build until cavity preparation is filled to the desired level. Due to the flowable consistency of CORE-FLO, placement with a hand instrument is not recommended.

Refer to manufacturer's instructions. Not all one-bottle adhesives bond to dual-cured or self-cured composites.

* CORE-FLO, CAVITY CLEANSER and ETCH-37 are trademarks of Bisco, Inc.
ALL-BOND, ONE-STEP and UNI-ETCH are registered trademarks of Bisco, Inc.
Low Viscosity is a trademark of Centrix, Inc.

HOW SUPPLIED:

Introductory Package
1 Syringe Base (4g), 1 Syringe Catalyst (4g), Accessories, Instructions/MSDS

Starter Package
1 Jar Base (7g), 1 Jar Catalyst (7g), Accessories, Instructions/MSDS

Economy Package
1 Jar Base (28g), 1 Jar Catalyst (28g), Accessories, Instructions/MSDS

Bulk Package
2 Jars Base (28g ea.), 2 Jars Catalyst (28g ea.), Accessories, Instructions/MSDS

STORAGE: Store at room temperature (22°C/72°F). See individual component labels for specific expiration dates.

PRECAUTIONS: Unpolymerized resins may cause skin sensitization in susceptible persons. In case of contact with the skin, wash thoroughly with soap and water.

WARRANTY: Bisco, Inc. recognizes its responsibility to replace products if proven to be defective. Bisco, Inc. does not accept liability for any damages or loss, either direct or consequential, stemming from the use of or inability to use the products described. Before using, it is the responsibility of the user to determine the suitability of the product for its intended use. The user assumes all risk and liability in connection therewith.

CAUTION: U.S. Federal law restricts this device to sale by or on the order of a dental professional.

BISCO, INC.
1100 W. Irving Park Rd.
Schaumburg, IL 60193
U.S.A.
847-534-6000
1-800-BIS-DENT
www.bisco.com

CE ADMINISTRATOR
Bisico France -
Mr. Fred Picavet
L'Opera- BP. 60
13680 Lancon De Provence
France
Phone: 33-490-42-9292
Fax: 33-490-42-9261

Rev. 11/01
IN-046R1