EZ-DOSE™* SYRINGE
2. Open the EZ-DOSE tip by slightly twisting and gently pulling the tip. Be sure to pull beyond the perforated section.
3. Direct tip to the desired placement location and push syringe plunger.
4. To remove the tip, pull syringe plunger.
5. Push the EZ-DOSE tip upward.
6. Pull the tip out of the chamber through the side of the EZ-DOSE SYRINGE.
AVAILABLE
EZ-DOSE PRODUCTS:
EZ-DOSE SYRINGE xxxxxxxxxxxxxx X-80802P
UNI-ETCH
(32% PHOSPHORIC ACID) SEMI-GEL
50 EZ-DOSE Tips (0.2g ea.) xxxxx E-53220P
100 EZ-DOSE Tips (0.2g ea.) xxxx E-53240P
UNI-ETCH (32% PHOSPHORIC ACID) SEMI-GEL W/BACs
50 EZ-DOSE Tips (0.2g ea.) xxxxx E-53220BP
100 EZ-DOSE Tips (0.2g ea.) xxxx E-53240BP
WARRANTY: Bisco, Inc. recognizes its responsibility to replace products if proven to be defective. Bisco, Inc. does not accept liability for any damages or loss, either direct or consequential, stemming from the use of or inability to use the products as described. Before using, it is the responsibility of the user to determine the suitability of the product for its intended use. The user assumes all risk and liability in connection therewith.
CAUTION:
U.S. Federal law restricts this device to sale by or on the order
of a dental professional.
Bisco, Inc.
1100 W. Irving Park Rd.
Schaumburg, IL 60193
1-(800)-BIS-DENT
847-534-6000
CE ADMINISTRATOR
Bisico France -
Mr. Fred Picavet
L'Opera- BP. 60
13680 Lancon De Provence
France
Phone: 33-490-42-9292
Fax: 33-490-42-9261
IN-085
Rev. 9/01
* EZ-DOSE
is a trademark of Bisco, Inc.