|
MODELING RESIN is a light-cured,
low viscosity microfilled (30% by weight) resin formulation for
use as a composite sculpting resin. The properties of composite
naturally lend itself to adhere (stick) to your instrument. To overcome
this aggravating tackiness, MODELING RESIN was developed
to aid in the placement and shaping of your composites. By wetting
your instrument, MODELING RESIN can be used to place and
manipulate (sculpt) all of your direct composite restorations.
|
1. Remove cap and place
tip on syringe. Dispense one or two drops of MODELING RESIN
into a clean mixing well or onto a mixing pad.
2. Following placement of initial increment of composite to prepared
site, dip composite instrument into MODELING RESIN. With MODELING
RESIN on the instrument, sculpt your restoration and manipulate
the composite to desired shape.
3. Light-cure. Although MODELING RESIN requires light-curing
for ten (10) seconds, follow the curing time recommendations from
your composite manufacturer to ensure thorough curing of composite
increment. Additional composite increments will adhere to cured MODELING
RESIN.
STORAGE: Store
at room temperature (22°C/72°F). Refer to individual component
labels for specific expiration dates.
PRECAUTIONS: Uncured resins may cause skin sensitization in
susceptible persons. In case of contact with the skin, wash thoroughly
with soap and water.
WARRANTY: Bisco, Inc. recognizes its responsibility to replace
products if proven to be defective. Bisco, Inc. does not accept liability
for any damage or loss, either direct or consequential, stemming from
the use of or inability to use the products as described. Before using,
it is the responsibility of the user to determine the suitability
of the product for its intended use. The user assumes all risk and
liability in connection therewith.
CAUTION: U.S. Federal
law restricts this device to sale by or on the order of a dental
professional.
HOW SUPPLIED:
REF G-9316P
2 Syringes MODELING RESIN (1.5g ea.), 20 Black Disposable Syringe
Tips, Instructions/MSDS
Bisco, Inc.
1100 W. Irving Park Rd.
Schaumburg, IL 60193
1-(800)-BIS-DENT
847-534-6000
CE ADMINISTRATOR
Bisico France -
Mr. Fred Picavet
L'Opera- BP. 60
13680 Lancon De Provence
France
Phone: 33-490-42-9292
Fax: 33-490-42-9261
IN-129
Rev. 3/03
|