...

FIBER POST REMOVAL KIT INSTRUCTIONS FOR USE .U.S. Patent #'s 5,328,372 & 4,738,616 The FIBER POST REMOVAL KIT was designed for removal of BISCO'S FIBER POSTS (LIGHT-POST™, AESTHETI-PLUS™, AESTHETI-POST™, C-POST™) and U.M. FIBER POSTS (U.M. AESTHETI-PLUS™ and U.M. C-POST™). HOW SUPPLIED: REF X-80681P One Pin-Pilot Drill, One Nickel-Titanium Drill, One #2 Peeso Reamer, Instructions. Export Only REF X-80681PX One Pin-Pilot Drill, One Nickel-Titanium Drill, One #2 Peeso Reamer, Instructions. PRECAUTIONS: It is recommended to use a new kit for each removal procedure for optimal results and to prevent drill breakage in the canal. To reduce heat, copious water irrigation must be used during post removal. C-POST is marketed outside of the U.S. under the trade name COMPOSIPOST. U.M. Aestheti-Plus is marketed outside of the U.S. under the trade name Endo Plus FIBER POST REMOVAL TECHNIQUE 1) Drill an orientation hole with the pin-pilot drill through the center of the post. 2) Using the Nickel-Titanium drill (safe tip) at 15000 RPM, gently begin drilling a hole through the center of the post. This will begin to hollow out the post. NOTE: A gentle water spray is recommended during removal to reduce heat. 3) Using the #2 Peeso Reamer (safe tip) gently drill through the hollow post again, with pressure applied peripherally. The hollowed post will get slightly larger but still be intact. 4) FIBER POST: Use the Pre-Shaping drill (one stripe) corresponding to the post size to remove most of what is left of the post. U.M. FIBER POST: Use an ISO #70 drill to remove most of what is left of the post 5) FIBER POST: Use the Finishing Drill (two stripes) corresponding to the post size to remove any of the remaining post. U.M. FIBER POST: Use drills corresponding to the post size to remove any of the remaining post. (e.g. to remove a ISO #120 post, use drill ISO #70 followed by ISO #100 and then ISO #120). CAUTION: U.S. Federal law restricts this device to sale by or on the order of a dental professional. Bisco, Inc. 1100 W. Irving Park Rd. Schaumburg, IL 60193 1-(800)-BIS-DENT 847-534-6000 CE ADMINISTRATOR Bisico France - Mr. Fred Picavet L'Opera- BP. 60 13680 Lancon De Provence France Phone: 33-490-42-9292 Fax: 33-490-42-9261 IN-069 Rev. 12/99