TESCERA^TM RUBBER SEPARATOR

GENERAL INFORMATION

1. Apply Rubber Separator to dry model/cast. Increased control in applying the material can be achieved by using an instrument of your choice. NOTE: Evaporation occurs with each use of Rubber Separator. To maintain the fluid-like nature of the material, periodically, add a few drops of distilled water to the bottle.

2. Allow to dry. The light pink color of Rubber Separator darkens as the material dries.

3. Continue with lab procedure.

HOW SUPPLIED:

T-18310P
1 Bottle (10g), Instructions/MSDS

STORAGE: Store at room temperature (22°C/72°F). See individual component labels for specific expiration dates.

PRECAUTIONS: Latex solids may cause allergic reactions in susceptible persons. In case of contact with the skin, wash thoroughly with soap and water.

WARRANTY: Bisco, Inc. recognizes its responsibility to replace products if proven to be defective. Bisco, Inc. does not accept liability for any damage or loss, either direct or consequential, stemming from the use of or inability to use the products as described. Before using, it is the responsibility of the user to determine the suitability of the product for its intended use. The user assumes all risk and liability in connection therewith.

CAUTION: U.S. Federal law restricts this device to sale by or on the order of a dental professional.

BISCO, INC.
1100 W. Irving Park Rd.
Schaumburg, IL 60193
U.S.A.
847-534-6000
1-800-BIS-DENT
www.bisco.com

CE ADMINISTRATOR
Bisico France -
Mr. Fred Picavet
L'Opera- BP. 60
13680 Lancon De Provence
France
Phone: 33-490-42-9292
Fax: 33-490-42-9261


IN-135
Rev. 9/04