|
|
Step
1. Shake TYRIAN SPE
unit-dose for 3-5 seconds. |
 |
Step
2. Press the chambers together, noting
color change to TYRIAN (purple). |
 |
Step
3. Remove cap. |
 |
Step
4. Stir, using a Foam Pellet or an applicator.
|
 |
Step
5. Dry the preparation for at least 5
seconds. Make sure no moist spots remain on the
tooth. |
 |
Step
6. Apply 2 coats of TYRIAN SPE to the
dentin and enamel. Agitate on enamel. Etch 15-20
seconds. |
 |
Step
7. Using a Foam Pellet (new or blotted
dry original), blot excess from preparation, leaving
surface shiny. |
 |
Step
8. At room temperature, shake ONE-STEP
PLUS bottle for 3-5 seconds and briefly vent prior
to dispensing. |
 |
Step
9. Apply 2 generous coats of ONE-STEP
PLUS to the dentin and enamel. Agitate slightly
for 10-15 seconds. |
 |
Step
10. Air dry gently to evaporate solvent.
Leave surface shiny. |
 |
Step
11. Light-cure for 10 seconds per surface. |
| |
****See
TYRIAN SPE/ONE-STEP PLUS Instruction Sheet for complete
product information. |
