|
|
Step
1. Dispense
1-2 drops of TYRIAN SPE PART A into mixing
well. |
 |
Step
2. Shake TYRIAN SPE PART B bottle
for 3-5 seconds. |
 |
Step
3. Dispense 1-2 drops of PART B
into same mixing well, noting color change
to tyrian (purple). |
 |
Step
4. Stir, using a Foam Pellet or
an applicator. |
 |
Step
5. Dry the preparation for at least
5 seconds. Make sure no moist spots remain
on the tooth. |
 |
Step
6. Apply 2 coats of TYRIAN SPE
to the dentin and enamel. Agitate on enamel.
Etch 15-20 seconds. |
 |
Step
7. Using a Foam Pellet (new or
blotted dry original), blot excess from preparation,
leaving surface shiny. |
 |
Step
8. At room temperature, shake ONE-STEP
PLUS bottle for 3-5 seconds and briefly vent
prior to dispensing. |
 |
Step
9. Apply 2 generous coats of ONE-STEP
PLUS to the dentin and enamel. Agitate slightly
for 10-15 seconds. |
 |
Step
10. Air dry gently to evaporate
solvent. Leave surface shiny. |
 |
Step
11. Light-cure for 10 seconds per
surface. |
| |
******See
TYRIAN SPE/ONE-STEP PLUS instruction sheet
for complete product information. |
