|
|
Step
1. Dispense 1-2 drops of
TYRIAN SPE PART A into mixing well. |
 |
Step
2. Shake TYRIAN SPE PART B bottle for 3-5 seconds. |
 |
Step
3. Dispense 1-2 drops of PART B into same mixing
well, noting color change to tyrian (purple). |
 |
Step
4. Stir, using a Foam Pellet or an applicator. |
 |
Step
5. Dry the preparation for at least 5 seconds.
Make sure no moist spots remain on the tooth. |
 |
Step
6. Apply 2 coats of TYRIAN SPE to the dentin
and enamel. Agitate on enamel. Etch 15-20 seconds. |
 |
Step
7. Using a Foam Pellet (new or blotted dry
original), blot excess from preparation, leaving surface
shiny. |
 |
Step
8. At room temperature, shake ONE-STEP PLUS
bottle for 3-5 seconds and briefly vent prior to dispensing.
|
 |
Step
9. Apply 2 generous coats of ONE-STEP PLUS
to the dentin and enamel. Agitate slightly for 10-15 seconds. |
 |
Step
10. Air dry gently to evaporate solvent. Leave
surface shiny. |
 |
Step
11. Light-cure for 10 seconds per surface. |
| |
****See
TYRIAN SPE/ONE-STEP PLUS Instruction Sheet for complete
product information |
