null
Skip to main content
Buy 1 All-Bond Universal, get a 4-5g pack of Select HV Etch w/BAC FREE

Valid on the 6ml bottle only. Use Promo code 26BOND4. U.S. Customers only. Discount cannot be combined with any other offer. Unlimited quantities. Expires 12/31/26.

Shop All-Bond Universal
All-Bond Universal Bottle by BISCO
All-Bond Universal

BISCO’s All-Bond Universal is a light-cured, universal adhesive.

TheraCal LC by BISCO
TheraCal LC

BISCO’s TheraCal LC is a light-cured, resin-modified calcium silicate material.

TheraCem by BISCO
TheraCem Dual-Syringe

TheraCem is a self-adhesive, calcium and fluoride releasing, dual-cured resin cement.

Z-Prime by BISCO
Z-Prime Plus

Z-Prime Plus is a single component priming agent for Zirconia, Metal, and Alumina substrates.

Universal Primer and Core-Flo™ DC or DC Lite promote adhesion to dentin and enamel and are compatible with dual-cure materials. The adhesive provides a low film thickness seal, while Core-Flo offers dual-cure polymerization, high strength, and flowable handling for adaptable core build-ups.

Keep scrolling for BISCO's recommended Step-by-Step technique.

core-flo dc and dc lite core build up step 1
STEP 1

Isolate

Isolate tooth and prepare accordingly. Rinse and dry.
core-flo dc and dc lite core build up step 2
STEP 2

Dispense

Dispense 1-2 drops of Universal Primer™ parts A & B into a clean well. Apply two separate coats of Universal Primer™ parts A & B, scrubbing the preparation with a microbrush for 10-15 seconds per coat.
core-flo dc and dc lite core build up step 3
STEP 3

Evaporate

Evaporate excess solvent by thoroughly air-drying with an air syringe for at least 10 seconds; there should be no visible movement of the adhesive. The surface should have a uniform glossy appearance; otherwise, apply an additional coat of Universal Primer parts A & B and air dry.
core-flo dc and dc lite core build up step 4
STEP 4

Place

Place the end of the intra-oral tip directly onto the preparation, and express Core-Flo DC or Core-Flo DC Lite.
core-flo dc and dc lite core build up step 4
STEP 5

Light cure

Light cure the Core-Flo DC or Core-Flo DC Lite for 40 seconds and continue with final preparation.

Not this case? Explore other procedures.

Quickly find the right materials for your next procedure.