null
Skip to main content
Buy 1 All-Bond Universal, get a 4-5g pack of Select HV Etch w/BAC FREE

Valid on the 6ml bottle only. Use Promo code 26BOND4. U.S. Customers only. Discount cannot be combined with any other offer. Unlimited quantities. Expires 12/31/26.

Shop All-Bond Universal
All-Bond Universal Bottle by BISCO
All-Bond Universal

BISCO’s All-Bond Universal is a light-cured, universal adhesive.

TheraCal LC by BISCO
TheraCal LC

BISCO’s TheraCal LC is a light-cured, resin-modified calcium silicate material.

TheraCem by BISCO
TheraCem Dual-Syringe

TheraCem is a self-adhesive, calcium and fluoride releasing, dual-cured resin cement.

Z-Prime by BISCO
Z-Prime Plus

Z-Prime Plus is a single component priming agent for Zirconia, Metal, and Alumina substrates.

Universal Primer and Core-Flo™ DC or DC Lite are indicated for post cementation and core build-up procedures. The adhesive supports adhesion and sealing within the canal, while Core-Flo offers dual-cure polymerization, flowable delivery for canal placement, and high strength to support post retention and core build-up.

See below for the Step-by-Step technique.

core-flo dc syringe
post cementation technique step 1
STEP 1

Total Etch

If using the Total Etch Technique, etch the canal with Uni-Etch® or Select HV® Etch for 15 seconds. If using the Self Etch Technique, proceed to the next step.
post cementation technique step 2
STEP 2

Clean and irrigate

Clean and irrigate. Rinse canal with water. Remove excess water with a brief burst of air and paper point(s) to remove the pooled water from the canal.
post cementation technique step 3
STEP 3

Dispense

Dispense Universal Primer™ mix adhesive for 5 seconds.
post cementation technique step 4
STEP 4

Endodontic Brush

With an endodontic brush, apply and scrub 2 separate coats at Universal Primer into the canal. Remove excess pooling of material with paper points and light suction. Gently air dry.
post cementation technique step 5
STEP 5

Coat

Coat the post with Universal Primer. Air Dry.
post cementation technique step 6
STEP 6

Inject

Inject Core-Flo™ DC or Core-Flo™ DC Lite into the canal.
post cementation technique step 7
STEP 7

Coat

Coat the apical end of the post with Core-Flo™ DC or Core-Flo™ DC Lite. Seat the post into the canal gently. Maintain firm pressure for 20-30 seconds.
post cementation technique step 8
STEP 8

Express

Continue to express Core-Flo DC or Core-Flo DC Lite around the post and build up the core to the desired height and shape. Remove the excess material and light cure for 40 seconds.

Not this case? Explore other procedures.

Quickly find the right materials for your next procedure.