X
 
 
Recently Viewed

You have not viewed any products recently.

 

BisDent Globe

Category:
 
Results: 24 Articles found.
Z-Prime_Plus_2ml

BISCO: Creating Solutions to Clinical Challenges! Bonding to Zirconia, Alumina and Metal with Z-PRIME™ Plus

Zirconia-based restorations and reinforced glass ceramics are the fastest growing segment in the North American laboratory market. Zirconia’s high strength and fracture toughness are two of its unique advantages compared to current glass filled ceramic systems. Zirconia has a flexural strength (900-1100 MPa) that is 5x greater than current ceramics; 2x as strong as alumina, and 3x as strong as e.max lithium disilicates.

 
Ace-All-Bond-SE-(All-Bond-SE)---alternate-image-2

How Does Your Self-Etch Adhesive Measure Up?

ALL-BOND SE is available in a convenient cartridge delivery that works with our ACE Dispenser. ACE offers one-click dispensing, for accuracy and convenience. Just click, mix and apply to the tooth—it’s that easy.

 
BisCover_LV_1

Tips For Best Clinical Success – BisCover™ LV

LESS IS MORE: The best results are achieved when you start with the right amount of material on the brush. Avoid using excess material as shown in Figure 1. It is easier and more effective to apply an extra layer if necessary than to remove excess. In addition, by applying the correct amount, the yellow color of the material will disappear during the curing process.

 
BISCOVER_LV

BisCover™ LV – Low Viscosity, Maximum Versatility

Before the advent of Bisco’s breakthrough BisCover™ Liquid Polish technology in 2003, the category of resin glazing products had very limited capabilities. They were indicated for extraoral use only, for provisional restorations. Most contained methyl methacrylate and had a strong unpleasant odor. They could only be cured with a halogen light and most cured with an oxygen inhibition layer that needed to be removed.

 
 
Results: 24 Articles found.
 
To get more information or sign-up, click here.
close