Blog
What is the recommended bonding technique for repairing e.max and porcelain restorations?
When repairing e.max and porcelain restorations, begin by applying Barrier Gel to protect exposed gi
When dealing with ceramic materials, can the bonding agent be light-cured before cementation?
If the planned restoration is a veneer less than 1.5 mm in thickness, the bonding agent (e.g. BISCO&
Do you need to place a bonding agent before TheraCal PT?
No. Achieve hemostasis, place TheraCal PT, light-cure for 10 seconds and place desired adhesive, bas
Can I use a bonding agent with Theracem?
A bonding agent can be used with Theracem, the application of an adhesive prior to cementing will in
Do I need to prime my restoration before cementation with TheraCem?
TheraCem contains MDP which offers an optimal bond to both zirconia and the tooth structure, without
When would you want/need to use a dual-cure adhesive?
“Dual-cured” and “Dual-cure compatible” adhesives are the most confused term
What's the difference between Core-Flo DC light and Core-Flo DC?
The main difference is the viscosity. Core-Flo DC is “stackable”, while Core-Flo DC
TheraCal PT and TheraCal LC – is there a reason to have both?
TheraCal PT is not intended to replace TheraCal LC. TheraCal PT and TheraCal LC share some of the sa
What are the differences and similarities between TheraCal PT and Mineral Trioxide Aggregate (MTA) material?
TheraCal PT is a resin-modified calcium silicate that has enhanced physical properties when compared
What is the difference between TheraCal PT and Calcium Hydroxide?
One of the known limitations of calcium hydroxide in its powder-liquid or paste-paste presentationsi
Can disinfectants or wetting agents (i.e. Chlorohexidine, Sodium Hypochlorite) be used prior to placing TheraCal PT?
Yes, after hemostatsis, disinfectants, desensitizers or wetting agents can be used. Please note per
Do I need to decontaminate my zirconia crown after try-in?
Yes, if you hope to achieve optimal and reliable cementation results. Removing contaminants from the
I think I may have bonded the contact between the restoration and the adjacent tooth together. How can I pass floss through this now?
If you cannot get a thin, PTFE-based floss through the contact, use an end-cutting saw to carefully
Why are the margins of my all ceramic restorations turning dark or black sometime after cementation?
You are probably using an iron-based chemical astringent for soft tissue management. Switch to an al
What is the best way to cement metal-ceramic Maryland bridge?
The Maryland Bridge has low retention strength and requires bonding.Cementing Metal-Ceramic Maryland
What is your recommendation to cement e.max crowns? What do you recommend for Zirconia crowns?
We recommend using Duo-Link Universal for e.max®* crowns and either Duo-Link Universal™ or The
Which bonding system is most ideal for anterior SSCs to mask the metal surface with opaque composite?
All of Bisco's adhesives provide high adhesion to metal and would be appropriate for this scenario.
What is the technique for cementing/bonding an IPS e.max onlay? Both treatment for the restoration and treatment for the tooth
IPS e.max lithium disilicate is a silaca-based ceramic, so HF etching followed by silane treatment i