Aelite™ Aesthetic Enamel

Low Viscosity Liquid Polish
BisCover LV is a low-viscosity, light-cured resin formulation used to seal all your composite restorations while leaving a smooth polished/glazed surface. Due to its unique proprietary chemistry, BisCover LV can be cured using an LED, PAC or halogen curing light in 30 seconds without a sticky oxygen-inhibited layer. BisCover LV is resistant to staining and color shifting resulting in more aesthetic results.

Unlike glazing products, BisCover LV can be used inside and outside the mouth to finish direct, indirect and provisional restorations.

Unique Benefits:

• Cures without an oxygen-inhibited layer, resulting in a high gloss surface
• Fully cures with LED, PAC and halogen curing lights
• Reduces or eliminates messy and time consuming manual polishing steps
• Easily seals and protects to prevent microbial attack, prevent staining and increase wear resistance
• Low film thickness eliminates occlusal adjustments

Clinical Significance:

• Unlike glazing products, BisCover LV can be used inside and outside the mouth to leave a dazzling finish
• Can be used on all types of direct, indirect and provisional restorations and appliances

Dual-Cured Adhesive

Universal Primer is for clinicians who prefer an adhesive/primer that does not need to be light-cured, fearing that the indirect restoration may not fit due to adhesive layer thickness.  Universal Primer does not need to be light-cured for post cementation or under crowns, onlays, inlays, etc. and can be used in direct restorative procedures, such as core build-ups and composites.  Universal Primer combines ease of use with virtually no post-operative sensitivity, and it is compatible with other cementation systems. 

Universal Primer is available as a 2-bottle system and as part of the Duo-Link Universal with Universal Primer Kit.

Unique Benefits:

• Both Dual-Curable and Dual-Cure compatible
• Can be used with total-, self- and selective etch techniques
• Clinical evaluation confirms the ease of use as a benefit, with virtually no post-operative sensitivity
• Provides a seal to minimize microleakage

Clinical Significance:

• No light-curing necessary when used for indirect restorations
• Low film thickness (<5µm) allows the adhesive/primer to readily flow into etched surfaces and offers both chemical and mechanical sealing

Light-Cured Dental Adhesive
All-Bond Universal is the culmination of over 30 years of adhesive research at BISCO. As a universal adhesive it can be used with direct and indirect restorations and is formulated to be compatible with light-, dual- and self-cured materials. The versatility of All-Bond Universal makes it an indispensable part of any dental practice.

Unique Benefits:

• Not moisture sensitive use on wet, dry or moist tooth structure
• Impressive bond strength to ALL substrates
• Use with ALL direct and indirect restorations (<10 micron thickness)
• Ideal chemical balance for both total- and self-etch adhesion from one bottle
• Compatible with ALL resin cements (no additional activator required)
• Virtually no post-operative sensitivity

Clinical Significance:

• All-Bond Universal offers the flexibility for total-, self- and selective-etch procedures
• All-Bond Universal is compatible with all light-, self- and dual-cured resin composite and cement materials for all direct and indirect procedures
• Other single bottle adhesives may need more than 1 bottle for indirect restorations, but with All-Bond Universal, NO activator is required.

Fortify is a light-cured, low viscosity resin formulated for use as a composite surface sealant.  Fortify has also been proven to reduce the wear of posterior composites by up to 45% at five years¹. A composite surface sealed with Fortify has improved wear resistance and long-term marginal integrity. In addition, it is effective with all anterior/posterior composites resulting in enhanced wear properties.

Unique Benefits:

• A composite surface sealed with Fortify has improved wear resistance and long-term marginal integrity
• Is effective with all anterior/posterior composites resulting in enhanced wear properties

1. Dickinson, GL, Leinfelder, KF. Assessing the Long-Term Effect of a Surface Penetrating Sealant. JADA, 124:68-72, 1993.

Sculpting and Wetting Agent for Composite
Modeling Resin is a light-curable, low viscosity microfilled resin (30% by weight) designed for use as a composite sculpting resin. By wetting your instrument with Modeling Resin, you can facilitate the placement and sculpting of all direct composite restorations without the worries of having the composite stick to the instrument. Unlike adhesives, Modeling Resin contains no solvent and is HEMA-free, so it will enhance composite placement without weakening the restoration.