Instructions
Select HV Etch Instructions For Use Rev 6-24
6-24SDS
Select HV SDS US English
EnglishSelect HV SDS INT English
EnglishSelect HV SDS INT Albanian
AlbanianSelect HV SDS INT Bulgarian
BulgarianSelect HV SDS INT Croatian
CroatianSelect HV SDS INT Czech
CzechSelect HV SDS INT Danish
DanishSelect HV SDS INT Dutch
DutchSelect HV SDS INT Estonian
EstonianSelect HV SDS INT Finnish
FinnishSelect HV SDS INT French
FrenchSelect HV SDS INT German
GermanSelect HV SDS INT Greek
GreekSelect HV SDS INT Hungarian
HungarianSelect HV SDS INT Icelandic
IcelandicSelect HV SDS INT Italian
ItalianSelect HV SDS INT Latvian
LatvianSelect HV SDS INT Lithuanian
LithuanianSelect HV SDS INT Macedonian
MacedonianSelect HV SDS INT Norwegian
NorwegianSelect HV SDS INT Polish
PolishSelect HV SDS INT Portuguese
PortugueseSelect HV SDS INT Romanian
RomanianSelect HV SDS INT Russian
RussianSelect HV SDS INT Slovak
SlovakSelect HV SDS INT Slovenian
SlovenianSelect HV SDS INT Spanish
SpanishSelect HV SDS INT Turkish
TurkishSelect HV SDS INT Swedish
SwedishCan I still use Select HV Etch with the total-etch technique?
Select HV Etch was designed for the selective-etch technique given it has a high viscosity. It can be used with the total-etch technique, but BISCO recommends using Uni-Etch or Etch-37 instead for total-etch. These etchants have a lower viscosity and are in a semi-gel state, meaning they will have a smoother flow.
What are the storage requirements for Select HV Etch?
Store at room temperature (20°C/68°F - 25°C/77°F). Store away from direct sunlight.
Which etching techniques are Select HV Etch most suitable for?
Select HV is ideal for the selective-etch technique. Its high viscosity offers pin-point placement making it ideal for etching enamel margins, otherwise known as the selective or “hybrid” etch technique. Select HV Etch can also be used for the total-etch technique. Etching with Select HV Etch significantly improves the quality of the etch pattern and increases the bond at the enamel margin.
How long should I etch or clean my restorations with Select HV Etch?
- Dentin and enamel, or enamel only, should be etched for 15 seconds.
- If using phosphoric acid as a cleaning agent on dental restorative materials: 30 seconds.
How does the “blue” color of Select HV Etch make etching easier?
Select HV Etch’s electric blue color allows for easy identification and contrast where deep color differentiation is important. The vibrant color assists clinicians in being able to see the product during placement and removal procedures.